Washer repair in Chino and Chino Hills Ca. were this frontload washer is flashing FH. For more help contact us on the web at http://www.apcoplus.com..

 

Whirlpool / Kenmore FRONTLOAD washer repair flashing FH in Chino Ca. / Chino Hills Ca. by Apco Appliance and Air. Tech Dave arrived and first checked water into machine. Both hot and cold valves seemed to open ok. Then he checked the pump for any obstructions by removing pump filter cap by turning it counter clockwise(pump is located behind lower panel in pic). Pump was clear of particules and draining well. FH is usually the flow meter, which senses the flow of water in the machine. This part is located right infront of the water valve assembly. We have run into the pressure switch faulty in some cases but very few. Good Luck and for more help go to www.apcoplus.com and contact a tech.

Whirlpool / Kenmore FRONTLOAD washer flashing FH. Washer repair in Chino Hills Ca. & Chino Ca. with Apco Appliance and Air......

Whirlpool / Kenmore FRONTLOAD washer flashing FH. Washer repair in Chino Hills Ca. & Chino Ca. with Apco Appliance and Air. This FRONTLOAD Whirlpool / Kenmore washer was flashing FH with in the first minute or 2 of the beginning of the cycle. This code means little or no water entering the machine. I have found that the pressure switch in some machines can be the problem. Most of the time it is the water valve but not this time. This time it turned out to be the water flow metering switch. This switch senses the amount of water entering the machine. Hope this helps someone. Here are some pics...