Whirlpool / Kenmore FRONTLOAD washer repair flashing FH in Chino Ca. / Chino Hills Ca. by Apco Appliance and Air. Tech Dave arrived and first checked water into machine. Both hot and cold valves seemed to open ok. Then he checked the pump for any obstructions by removing pump filter cap by turning it counter clockwise(pump is located behind lower panel in pic). Pump was clear so what he then noticed was that when FH showed up the machine immediately went into drain cycle. This told Dave that something was wrong with pressure switch. Pressure switch shuts machine off if water level goes to high and runs drain pump encased of over fill(pressure switch in pic is located on top to the right, switch is maroon and black in this pic). For help go to www.apcoplus.com and contact a tech.
No comments:
Post a Comment